USED- Battenfeld 17.5" Wide Sheet/Cast Film Line. Consisting Of: (1) Battenfeld 60 MM (2.3") single screw extruder, model 1-60-30DV, serial #89-7782-62, approximate 30:1 (more...)

USED: Arburg Allrounder injection mold machine, model 270M-250-75. 25 ton clamping pressure. Platen size 15.74" x 15.74". Distance between tie bars 10.62". Max daylight 2 (more...)

USED: Killion 12" Wide Cast Film Take Off. (1) 8" diameter x 12" wide chrome plated cored roll. (2) 5" diameter x 12" wide pull rolls, (1) rubber, (1) metal, pneumaticall (more...)

Used- Killion 8" Wide Cast Film Lab Chill Roll Stand. (1) 8" wide x 8" diameter chrome plated chill roll cored; (2) 5" diameter x 8" wide pull rolls, (1) rubber, (1) meta (more...)

Used- Killion 3/8’’ Diameter Tube Line consisting of: (1) Killion 1-1/2’’ single screw extruder, approximately 22 to 1 L/D ratio. Electrically heated, air cooled 3 zone n (more...)

Used- Hayssen Econoblow Blow Molding Machine, Model 5030-AS-375. Approximate 280 gram shot. 2" extruder, 24:1 L/D, 30 hp motor. 22-1/4" x 22-1/4" platens, effective plate (more...)

Used- Berstorff 25mm Twin Screw Extruder, Model ZE25, Co-Rotating Side by Side Screw Design. Approximate 28 to 1 L/D ratio. 6 barrel sections (3) vented, electrically hea (more...)

USED- Prodex Henschel High Intensity Lab Mixer, Approximately 10 Liter (.34 Cubic Feet), 316 Stainless Steel. Carbon steel jacketed bowl 9" diameter x 9" deep. Hinged top (more...)

Used- Henschel High Intensity Mixer, Model FM 75D. Approximate 75 Liter (2.6 Cubic Feet), 316 Stainless Steel. Carbon steel jacketed bowl 18-1/2" diameter x 17" deep. Hin (more...)

USED: Mitsubishi Injection Molding Machine, Model 70/30MSS. 30 ton clamping pressure, 20:1 L/D, platen size 15" (380mm) wide x 15" (380mm) high, distance between 1-3/4" t (more...)

Used- Boy Hydraulic Injection Mold Machine, Model 50T2. 50 Ton clamping pressure. Approximate shot sizes, 5.57 ounce with a 42mm screw, 4.58 with a 38mm screw, 3.25 with (more...)

Used- Akron Pelletizing Line Consisting Of: (1) Akron 1-1/2" single screw extruder, model MPAK 150. Approximate 40:1 L/D ratio. Electrically heated, air cooled. 5 zone ve (more...)

USED: Killion Pelletizing Line consisting of (1) Killion 1-1/4" extruder, 25:1 L/D. 4 zone electrically heated, air cooled, 2" diameter feed trough, 42" center line, 5 ho (more...)

USED: Conair 5" Pelletizer, Model 106. 8" diameter x 6" wide, approximately 32 cutting teeth, (1) 3-3/4" diameter Hayplon pull roll, (1) 1-7/8" diameter steel pull roll, (more...)

USED: C. F. Scheer Pelletizer, Model SGS200-EV. Approximate 7-3/4" diameter x 8" wide 32 blade helical rotor. (1) rubber, (1) metal pull roll. Driven by a 7.5 kw (10 hp) (more...)

USED: C. F. Scheer Pelletizer, Model SGS100. Approximate 8" diameter x 4" wide 28 blade helical rotor. (1) Rubber, (1) metal pull roll. Driven by a 4 kw (5.5 hp), 3/50/38 (more...)

USED: Killion 2" Strand Pelletizer. Approximate 18" helical knife rotor. 1 Rubber and 1 metal pull roll. 40" centerline height. Driven by a 1/2 hp, 180/200 volt, 1725 rpm (more...)

USED: Pelletizer 3" Wide, 8 blade rotor. (1) metal, (1) rubber pull roll. Driven by an approximate 3 kw motor with Cheetah drive panel. Unit mounted on stand. (more...)

Used- Papenmeier Mixer/Cooler Combo consisting of: (1) Model TS160 high intensity mixer, 316 stainless steel. Carbon steel jacketed bowl 23" diameter x 24" deep. Swing aw (more...)

USED- Rheometric Scientific Automated Melts Analyzer, Model RAMA. 15 AMP, 50/60 Cycle, 200/240 Volt. Can accommodate up to 18 test cartridges. (more...)

USED- Gottfert Capillary Rheometer, Model 012.01, Series 1000. Approximate 9.5 mm diameter x 200 mm long test barrel, rated up to 400 Degrees C, 10 kn test force. Include (more...)

USED- Gottfert Capillary Rheometer, Model 012.01, Series 1000. Approximate 9.5 mm diameter x 200 mm long test barrel, rated up to 400 Degrees C, 10 kn test force. Include (more...)

Used- Gottfert Rheometer, Model 019.2/20799. Manually adjustable raise/lower. Driven by a 1400 Watt motor thru reducer. Mounted on a carbon steel base. (more...)

Used- C.W. Brabender Plasti-Corder, Model PL-V300. Driven by a 3 HP, 230 Volt, 2500 RPM motor. Includes a chart recorder and an Allen Bradley control panel. Mounted on a (more...)

USED- TMI Pendulum Impact Tester. Approximately 11' per second. Requires pendulum arm. (more...)

USED: Eberbach Single Speed XP Lab Blender, Model 8017. (1) 4 liter, 301 stainless steel, mixing container. Driven by a 1-1/2 hp, 1/60/ 115/230 volt, 3450 rpm motor. Base (more...)

Used- Beckman Industrial Doric Digital Indicator, Model 400A. This is a solid state instrument designed to display a number of thermocouple, RTD, linear voltage sources a (more...)

USED- Kayeness Capillary Rheometer, Model LS8-402-2-0-A-2T-T-1-A. Rated 2 ton capacity. Includes digital display controls. Used to assess incoming material quality or to (more...)